Programming a button to record and play a sound in Compass.

1. Select the Modifybutton and then the button you wish to modify.
2. Place a label and symbol on the button.

1. Select the Modifybutton and then the button you wish to modify.
2. Place a label and symbol on the button.

     3.   Select the Actionsarea and search for the PlayRecording(name) action.


       4.   You will need to enter the name of the recording you wish to play. In part 1, we used the recording name “daily recording”.  IMPORTANT…You must use quotes around the name of the recording.


    5.   Select the green Done button to exit.